Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 64 Inch Wand

Listing is for Motor and Battery Pack (includes 4 “C” Batteries) W/64 Inch Shaft Application The Hot-Shot® prod is an electric livestock prod designed to assist in the movement of cattle and hogs. Function The Hot-Shot® prod uses batteries to power an electronic circuit that generates a high voltage pulse. This pulse is delivered by lightly touching the animal with the two electrodes. Prod is not designed for hitting or striking an animal. Animal Protection Please follow the regulations that apply to animal protection and slaughtering in your area. WARNINGS -Hot-Shot® prod is DESIGNED FOR USE ON LIVESTOCK ONLY -KEEP THE UNIT AWAY FROM CHILDREN -NEVER USE IT ON HUMANS -KEEP PROD DRY: If unit gets wet IMMEDIATELY TAKE STEPS TO THOROUGHLY DRY UNIT OUT to avoid corrosion and/or unintended feedback -Clean, dry and store prod in dry environment. Remove batteries prior to cleaning or drying -The prod generates a high voltage pulse and you should never touch the electrodes while the unit is activated -Use in a well ventilated area. Do not use near flammable liquids or dust -Whenever the prod is not in use, place the safety clip under the trigger button (for the DuraProd move the trigger lock to the lock position) -Intended for ground level use only. The item “Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 64 Inch Wand” is in sale since Monday, April 1, 2019. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “petsandvet” and is located in Hawarden, Iowa. This item can be shipped to United States.
  • Brand: Hot Shot
  • MPN: RH72
Tags: , , , , , , , ,
NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts

NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts

NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts

NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts

NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts

NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts

NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts

NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts. This kit has several replacement parts, testers and complete instructions for repairing your hot shot. The item “NEW Vintage Hot Shot Cattle Hog Livestock Prod Shocker Repair Kit With Parts” is in sale since Wednesday, January 30, 2019. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “feedguys” and is located in Glenwood, Iowa. This item can be shipped to United States.
  • Brand: Hot Shot
  • MPN: SabreSix
Tags: , , , , , , ,
Hot-Shot DuraProd Rechargeable Shocker Prod Wand Set Cattle Swine 36 Inch Wand

Hot-Shot DuraProd Rechargeable Shocker Prod Wand Set Cattle Swine 36 Inch Wand. The Hot Shot DuraProd Rechargeable Livestock Prod and shaft deliver consistent, superior performance in a new ergonomic design. Benefits include: Durabilitysealed circuit ensures unit will work in all conditions. Reliabilitytested using six proprietary measures to ensure consistent performance. Safetynew patent pending Circuit Isolation Technology reduces feedback shock during use. User Comfortnew handle design featuring rubber overmolded grip, oversized trigger and hand guard. Does not include charger!!! Without a Federal Export License. SAFETY INSTRUCTIONS CAREFULLY READ AND FOLLOW INSTRUCTIONS BEFORE USING THE HOT-SHOT® DURAPROD. The DuraProd is DESIGNED FOR USE ON LIVESTOCK ONLY. Never use the DuraProd on humans. KEEP THE UNIT AWAY FROM CHILDREN. The DuraProd generates a high voltage pulse, and you should never touch the electrodes while the unit is activated. Clean, dry and store DuraProd in dry environment. Remove batteries prior to cleaning or drying KEEP DURAPROD DRY – If unit gets wet IMMEDIATELYTAKE STEPS TO THOROUGHLY DRY UNIT OUT to avoid corrosion and/or unintended feedback Use in a well ventilated area. Do not use near flammable liquids or dust. Whenever the Prod is not in use, move the trigger lock to the lock position. IF USING RECHARGABLE UNIT COMPLETELY CHARGE PRIOR TO FIRST USE. Intended for ground level use onlyThe DuraProd is an electric livestock prod designed to assist in the movement of cattle and hogs. FunctionThe DuraProd uses batteries to power an electronic circuit that generates a high voltage pulse. This pulse is delivered by touching the animal with the two electrodes. Animal ProtectionPlease follow the regulations that apply to animal protection & slaughtering in your area. OperationTo activate this prod move trigger button to unlock position, touch the two brass prongs on the end of the prod to the animal and press the trigger button. A light tough against the animal gives the most effective results. Only apply a shock to the animal as required. Changing BatteriesBefore attempting to remove the battery compartment, make sure the trigger lock is engaged (located on the bottom of the handle). Removing & Reinstalling the Battery Pack:1. Detach the battery compartment from the end of the DuraProd by applying pressure to the opposing black tabs connecting the compartment to the handle. As you squeeze the tabs, lightly pull the compartment away from the handle. The compartment should come free with little effort. For reinstallation of the Battery Pack: depress Battery Pack tabs and snap onto Motor unit to secure. For the ALKALINE BATTERY PACK (item # DXABP), the batteries are secured in the Battery Pack by a twist-off cap. To remove and replace: Twist off the cap by turning the top counterclockwise. Remove all batteries and insert the new ones according to the diagram. Replace the cap, press firmly, and turn clockwise. For the RECHARGEABLE BATTERY PACK (item # DXRBP), the Battery Pack needs to be placed in the Charger Base (item # DXRC). DO NOT ATTEMPT TO USE THE DXRC WITH ANY OTHER TYPE OF ADAPTOR OTHER THAN R12 AND R110. To charge, place the pack into the base, making sure the charger cord is properly plugged into the Charger Base and a working power supply. The LED light will turn on and continue to flash until the battery is fully charged approx. After 16 hours the LED light will stop flashing and remain on (solid light). The Charger Base has an internal timer. If the Battery Pack is removed from the base, the timer will reset. Do not disassemble the Charger Base. There are no serviceable parts inside. Unplug the Charger Base when not in use. Never expose the Charger Base to moisture. The Battery Pack can remain in the Charger Base for an extended period of time without damage. When the Battery Pack is fully charged, reattach the pack onto the DuraProd by snapping it onto the handle. Do not disassemble the Rechargeable Battery Pack. The Rechargeable Battery Pack will need to be fully charged before the prod can be used for the first time. The DuraProd is now ready for use. New Rechargeable Battery Packs arrive in a discharge condition and must be fully charged before use. This conditioning charge may take up to 16-24 hours. It is recommended that you fully charge and fully discharge your Rechargeable Battery Pack 2-4 times to allow the batteries to reach its rated capacity. The term fully discharge means to use the Rechargeable Battery Pack in the Hot-Shot® device under normal conditions until the device no longer operates correctly. It is a good idea to have a second battery pack charged and ready when the first battery pack discharges. Keep the Rechargeable Battery Pack clean and dry! It is good maintenance to clean the Rechargeable Battery contacts with a cotton swab and alcohol or use a pencil eraser to remove any dirt or grime. When storing the Rechargeable Battery Pack, wipe it down with a clean dry cloth and store it in a cool dry place away from heat sources and any metal objects. Rechargeable batteries must be disposed of properly and may not be disposed of in the municipal waste stream. This means you can dispose of your rechargeable battery for free at one of the thousands of disposal sites across the nation. Please note that only the DXRBP is recyclable all other HOT-SHOT® Prod components are not covered by this program. Using the HOT-SHOT® DuraProd Make sure the trigger lock is in the down or unlocked position. Apply the electrodes to the muscle of the hind leg of the animal. Press and release trigger. Never touch the prod to an animals face, ears, head area, or genitals. As an alternative method, press the trigger and then touch the animal. The DuraProd is a humane means for moving stubborn animals when other methods are ineffective. Never hold the electrodes on an animal for an extended period while the trigger is depressed. Maintaining your HOT-SHOT® DuraProdIt is important to keep you HOT-SHOT® DuraProd clean and dry for best performance. Follow proper maintenance after each use. 1 Thoroughly CLEAN AND DRY the HOT-SHOT® Livestock Prod after each use:a. Remove shaft from handle and dry connection area of shaft and handleb. Wipe handle with a dry cloth, particularly around the trigger button and battery compartment areas2. Inspect shaft tip for damage or excessive wear and replace as necessary3. Store with shaft separated from unit to allow for complete drying in areas that can’t be wiped dry4. The HOT-SHOT® Prod handle may be stored lying down, the shaft may be hung from shaft hang hole in the tip. Before purchasing any items/product, please insure your country allows this product to be imported. Canceling an Order If you need to cancel an order or make changes, the request must be made within one hour of placing the order and confirmed by an E-Commerce Customer Service Representative. The following rules apply: · Products must be in original packaging and in a new and resalable condition. · Any product that was used or fully/partially installed is non-returnable. Excellent customer service and competitive pricing, is what you will receive when purchasing from Livestock Concepts. We supply a complete line of animal health supplies to livestock producers, veterinarians, pet and equine owners, as well as hobby farmers. We offer over 14,000 items for cattle, swine, sheep, goats horses, pets, birds and exotic animals. We market to 50 states as well as over 60 countries. We provide fast, friendly service, and cherish our customers. Books & Educational Items. Buckets, Tubs & Feeders. Clothing & Boots & Belts. Lawn Garden & BackYard. Pet Equipment & Treats. Rodent & Pest Control. The item “Hot-Shot DuraProd Rechargeable Shocker Prod Wand Set Cattle Swine 36 Inch Wand” is in sale since Monday, December 3, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “livestockconcepts” and is located in Hawarden, Iowa. This item can be shipped to United States.
  • Brand: Hot Shot
  • MPN: DXR36
Tags: , , , , , , , ,
Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 40 Inch Wand

Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine W/ 40 Inch Wand. 40 Inch Wand Listing is for Motor and Battery Pack (includes 4 “C” Batteries) W/40 Inch Shaft Scroll down for shaft pricing and sizes, or other listings. The Hot-Shot® prod is an electric livestock prod designed to assist in the movement of cattle and hogs. The Hot-Shot® prod uses batteries to power an electronic circuit that generates a high voltage pulse. This pulse is delivered by lightly touching the animal with the two electrodes. Prod is not designed for hitting or striking an animal. Please follow the regulations that apply to animal protection and slaughtering in your area. Hot-Shot® prod is DESIGNED FOR USE ON LIVESTOCK ONLY -KEEP THE UNIT AWAY FROM CHILDREN -NEVER USE IT ON HUMANS -KEEP PROD DRY: If unit gets wet IMMEDIATELY TAKE STEPS TO THOROUGHLY DRY UNIT OUT to avoid corrosion and/or unintended feedback -Clean, dry and store prod in dry environment. Remove batteries prior to cleaning or drying -The prod generates a high voltage pulse and you should never touch the electrodes while the unit is activated -Use in a well ventilated area. Do not use near flammable liquids or dust -Whenever the prod is not in use, place the safety clip under the trigger button (for the DuraProd move the trigger lock to the lock position)-Intended for ground level use only. Before purchasing any items/product, please insure your country allows this product to be imported. Canceling an Order If you need to cancel an order or make changes, the request must be made within one hour of placing the order and confirmed by an E-Commerce Customer Service Representative. The following rules apply: · Products must be in original packaging and in a new and resalable condition. · Any product that was used or fully/partially installed is non-returnable. Excellent customer service and competitive pricing, is what you will receive when purchasing from Livestock Concepts. We supply a complete line of animal health supplies to livestock producers, veterinarians, pet and equine owners, as well as hobby farmers. We offer over 14,000 items for cattle, swine, sheep, goats horses, pets, birds and exotic animals. We market to 50 states as well as over 60 countries. We provide fast, friendly service, and cherish our customers. Books & Educational Items. Buckets, Tubs & Feeders. Clothing & Boots & Belts. Lawn Garden & BackYard. Pet Equipment & Treats. Rodent & Pest Control. The item “Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 40 Inch Wand” is in sale since Monday, July 23, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “livestockconcepts” and is located in Hawarden, Iowa. This item can be shipped to United States.
  • Brand: Hot Shot
  • MPN: DX48
Tags: , , , , , , , ,
Magrath Electric Shocker Prod Wand Set Cattle Swine With 34 Inch Shaft

Magrath Electric Shocker Prod Wand Set Cattle Swine With 34 Inch Shaft

Includes: 1 Power Pack without Batteries & 1 34 Shaft. The Magrath Stock Prod is designed to help handle and move livestock effectively and efficiently. As a market leader, it has proven itself on the road and in the stockyards for over 40 years both in the US and throughout the world. Time tested and proven effective. Tip rotates to any position Clog-free, no ground tip Tough, flexible shaft up to 90 degrees High energy, longer lasting alkaline batteries Durable, reliable solid state electronics system Transmits very low current to animal with strong, instantaneous jolt Finger guide to find switch by feel Rubber switch insulator for prevention of feedback Precious metal battery contacts wont corrode Heavy coil spring assures firm battery contact Tough, structural grade plastic case. The item “Magrath Electric Shocker Prod Wand Set Cattle Swine With 34 Inch Shaft” is in sale since Sunday, December 2, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “petsandvet” and is located in Hawarden, Iowa. This item can be shipped to United States.
  • Brand: Magrath
  • MPN: 12760 13751
Tags: , , , , , , , ,
25inch Electric Shocker Prod Livestock Cattle Pig Wand Set Livestock Supplies

25inch Electric Shocker Prod Livestock Cattle Pig Wand Set Livestock Supplies

25inch Electric Shocker Prod Livestock Cattle Pig Wand Set Livestock Supplies

25inch Electric Shocker Prod Livestock Cattle Pig Wand Set Livestock Supplies

25inch Electric Shocker Prod Livestock Cattle Pig Wand Set Livestock Supplies

The use of electric shock hog, effortlessly, no bending, no harm pig skin. Battery diversity of choice (rechargeable battery / battery section II D). Switching discharge, more energy security. With the new design, the use of appropriate stimulation current physical stimulation of pigs, pig to avoid injury. Charging time 6 hours of continuous work, more power. To charge the unit, use the included Linher electronic charger: a. Unscrew the screw and remove the end couver. Slide the rechargeable battery pack out or leave there. Plug the charge pin into the pack, then connect the AC power. The RED charger light is on, indicating that charging is in progress. Wait 8-10 hours or until the RED charger light turns GREEN. Replace the pack; replace the end cover and the screw. If unit is not used for extended periods of time, remove the battery pack for storage. If the unit is dropped in standing water, remove the battery pack, to ensure there is on water inside. If water is present, allow battery to air-dry for 24 hours. Ensure there is no moisture in the battery pack or handle unit before using or storing. When the prod is not in use, attach the safety clip to the trigger button to avoid accidental discharge. Always us a shaft length that allows you to maintain a safe working distance form all livestock. To attach the shaft to handle unit, place shaft onto handle and tighten white collarnut. To remove the motor, unscrew the brass nut and remove the end cover, slide the battery case out and then alide the motor out. If the motor wont come out. You should remove the shaft and push the motor out from the shaft end of the handle. Then you can replace the motor. To use the prod, remove the safety clip from the trigger button and place the wrist strap around your wrist. Press the trigger and place the contact points of the prod on the rear of the animal. For baest results, simply press, touch and release. Operators are encouraged to minimize use of stock prod. Use caution when using the Linher prod on wet animals because of potential increase in intensity. 1 Set of Electric Shocker Prod (154129). The item “25inch Electric Shocker Prod Livestock Cattle Pig Wand Set Livestock Supplies” is in sale since Friday, February 2, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Other Livestock Supplies”. The seller is “ascprinting” and is located in Scarborough, Ontario. This item can be shipped to Canada, United States.
  • Brand: Unbranded/Generic
  • MPN: 154129
Tags: , , , , , , ,
Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 52 Inch Wand

Hot-Shot DuraProd Listing is for Motor and Battery Pack (includes 4 “C” Batteries) W/52 Inch Shaft Application The Hot-Shot® prod is an electric livestock prod designed to assist in the movement of cattle and hogs. Function The Hot-Shot® prod uses batteries to power an electronic circuit that generates a high voltage pulse. This pulse is delivered by lightly touching the animal with the two electrodes. Prod is not designed for hitting or striking an animal. Animal Protection Please follow the regulations that apply to animal protection and slaughtering in your area. WARNINGS -Hot-Shot® prod is DESIGNED FOR USE ON LIVESTOCK ONLY -KEEP THE UNIT AWAY FROM CHILDREN -NEVER USE IT ON HUMANS -KEEP PROD DRY: If unit gets wet IMMEDIATELY TAKE STEPS TO THOROUGHLY DRY UNIT OUT to avoid corrosion and/or unintended feedback -Clean, dry and store prod in dry environment. Remove batteries prior to cleaning or drying -The prod generates a high voltage pulse and you should never touch the electrodes while the unit is activated -Use in a well ventilated area. Do not use near flammable liquids or dust -Whenever the prod is not in use, place the safety clip under the trigger button (for the DuraProd move the trigger lock to the lock position) -Intended for ground level use only. The item “Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 52 Inch Wand” is in sale since Monday, August 20, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “petsandvet” and is located in Hawarden, Iowa. This item can be shipped to United States.
  • Brand: Hot Shot
  • MPN: HUDX7613566
Tags: , , , , , , , ,
52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable

Electric Shocker Prod Yellow 52inch. Improve the efficiency of livestock in the hurl, the voltage is safe, and the livestock will not be injured. Using battery to generate safety pulse and high voltage, and transfer the safe pulse voltage to the two metal tips on the top of the pole, and touch the skin of the livestock with two metal tips to create the sting. The livestock moved away immediately after the feeling of pain. Battery pack disassembly and installation. Note: before taking off the charge group, please make sure that the protection lock under the handle has been locked. Press the black clasp next to the battery pack in the tail of the pig’s handle with the thumb and index finger. Press the clasp and gently separate the charge group from the head of the handle. Reload the battery pack: press the buckle with the thumb and index finger at the same time, and buckle the head of the handle. Please use the matching charging adapter. First write down the battery pack and clean the handle of the pig B. Can be a semi wet cloth with a small amount of detergent and gently wipe off the pig C. After the cleaning is finished, it is reinstalled. Please confirm that the handle of the pig is completely dried. Note: do not soak the machine in the water. Electric Shocker Prod Yellow 52inch(154026). A set of Electric Shocker Prod Yellow Battery(154028). Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. The item “52inch Electric Shocker Prod for Cattle Pig Livestock Supplies Rechargeable” is in sale since Monday, November 12, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Other Livestock Supplies”. The seller is “eezglobal” and is located in Hayward, California. This item can be shipped to United States.
  • Brand: Unbranded
  • MPN: 154026
Tags: , , , , , , ,
Hot-Shot DuraProd Rechargeable Shocker Prod Wand Set Cattle Swine 36 Inch Wand

Hot-Shot DuraProd Rechargeable Shocker Prod Wand Set Cattle Swine 36 Inch Wand. The Hot Shot DuraProd Rechargeable Livestock Prod and shaft deliver consistent, superior performance in a new ergonomic design. Benefits include: Durabilitysealed circuit ensures unit will work in all conditions. Reliabilitytested using six proprietary measures to ensure consistent performance. Safetynew patent pending Circuit Isolation Technology reduces feedback shock during use. User Comfortnew handle design featuring rubber overmolded grip, oversized trigger and hand guard. Does not include charger!!! Without a Federal Export License. SAFETY INSTRUCTIONS CAREFULLY READ AND FOLLOW INSTRUCTIONS BEFORE USING THE HOT-SHOT® DURAPROD. The DuraProd is DESIGNED FOR USE ON LIVESTOCK ONLY. Never use the DuraProd on humans. KEEP THE UNIT AWAY FROM CHILDREN. The DuraProd generates a high voltage pulse, and you should never touch the electrodes while the unit is activated. Clean, dry and store DuraProd in dry environment. Remove batteries prior to cleaning or drying KEEP DURAPROD DRY – If unit gets wet IMMEDIATELYTAKE STEPS TO THOROUGHLY DRY UNIT OUT to avoid corrosion and/or unintended feedback Use in a well ventilated area. Do not use near flammable liquids or dust. Whenever the Prod is not in use, move the trigger lock to the lock position. IF USING RECHARGABLE UNIT COMPLETELY CHARGE PRIOR TO FIRST USE. Intended for ground level use onlyThe DuraProd is an electric livestock prod designed to assist in the movement of cattle and hogs. FunctionThe DuraProd uses batteries to power an electronic circuit that generates a high voltage pulse. This pulse is delivered by touching the animal with the two electrodes. Animal ProtectionPlease follow the regulations that apply to animal protection & slaughtering in your area. OperationTo activate this prod move trigger button to unlock position, touch the two brass prongs on the end of the prod to the animal and press the trigger button. A light tough against the animal gives the most effective results. Only apply a shock to the animal as required. Changing BatteriesBefore attempting to remove the battery compartment, make sure the trigger lock is engaged (located on the bottom of the handle). Removing & Reinstalling the Battery Pack:1. Detach the battery compartment from the end of the DuraProd by applying pressure to the opposing black tabs connecting the compartment to the handle. As you squeeze the tabs, lightly pull the compartment away from the handle. The compartment should come free with little effort. For reinstallation of the Battery Pack: depress Battery Pack tabs and snap onto Motor unit to secure. For the ALKALINE BATTERY PACK (item # DXABP), the batteries are secured in the Battery Pack by a twist-off cap. To remove and replace: Twist off the cap by turning the top counterclockwise. Remove all batteries and insert the new ones according to the diagram. Replace the cap, press firmly, and turn clockwise. For the RECHARGEABLE BATTERY PACK (item # DXRBP), the Battery Pack needs to be placed in the Charger Base (item # DXRC). DO NOT ATTEMPT TO USE THE DXRC WITH ANY OTHER TYPE OF ADAPTOR OTHER THAN R12 AND R110. To charge, place the pack into the base, making sure the charger cord is properly plugged into the Charger Base and a working power supply. The LED light will turn on and continue to flash until the battery is fully charged approx. After 16 hours the LED light will stop flashing and remain on (solid light). The Charger Base has an internal timer. If the Battery Pack is removed from the base, the timer will reset. Do not disassemble the Charger Base. There are no serviceable parts inside. Unplug the Charger Base when not in use. Never expose the Charger Base to moisture. The Battery Pack can remain in the Charger Base for an extended period of time without damage. When the Battery Pack is fully charged, reattach the pack onto the DuraProd by snapping it onto the handle. Do not disassemble the Rechargeable Battery Pack. The Rechargeable Battery Pack will need to be fully charged before the prod can be used for the first time. The DuraProd is now ready for use. New Rechargeable Battery Packs arrive in a discharge condition and must be fully charged before use. This conditioning charge may take up to 16-24 hours. It is recommended that you fully charge and fully discharge your Rechargeable Battery Pack 2-4 times to allow the batteries to reach its rated capacity. The term fully discharge means to use the Rechargeable Battery Pack in the Hot-Shot® device under normal conditions until the device no longer operates correctly. It is a good idea to have a second battery pack charged and ready when the first battery pack discharges. Keep the Rechargeable Battery Pack clean and dry! It is good maintenance to clean the Rechargeable Battery contacts with a cotton swab and alcohol or use a pencil eraser to remove any dirt or grime. When storing the Rechargeable Battery Pack, wipe it down with a clean dry cloth and store it in a cool dry place away from heat sources and any metal objects. Rechargeable batteries must be disposed of properly and may not be disposed of in the municipal waste stream. This means you can dispose of your rechargeable battery for free at one of the thousands of disposal sites across the nation. Please note that only the DXRBP is recyclable all other HOT-SHOT® Prod components are not covered by this program. Using the HOT-SHOT® DuraProd Make sure the trigger lock is in the down or unlocked position. Apply the electrodes to the muscle of the hind leg of the animal. Press and release trigger. Never touch the prod to an animals face, ears, head area, or genitals. As an alternative method, press the trigger and then touch the animal. The DuraProd is a humane means for moving stubborn animals when other methods are ineffective. Never hold the electrodes on an animal for an extended period while the trigger is depressed. Maintaining your HOT-SHOT® DuraProdIt is important to keep you HOT-SHOT® DuraProd clean and dry for best performance. Follow proper maintenance after each use. 1 Thoroughly CLEAN AND DRY the HOT-SHOT® Livestock Prod after each use:a. Remove shaft from handle and dry connection area of shaft and handleb. Wipe handle with a dry cloth, particularly around the trigger button and battery compartment areas2. Inspect shaft tip for damage or excessive wear and replace as necessary3. Store with shaft separated from unit to allow for complete drying in areas that can’t be wiped dry4. The HOT-SHOT® Prod handle may be stored lying down, the shaft may be hung from shaft hang hole in the tip. Before purchasing any items/product, please insure your country allows this product to be imported. Canceling an Order If you need to cancel an order or make changes, the request must be made within one hour of placing the order and confirmed by an E-Commerce Customer Service Representative. The following rules apply: · Products must be in original packaging and in a new and resalable condition. · Any product that was used or fully/partially installed is non-returnable. Excellent customer service and competitive pricing, is what you will receive when purchasing from Livestock Concepts. We supply a complete line of animal health supplies to livestock producers, veterinarians, pet and equine owners, as well as hobby farmers. We offer over 14,000 items for cattle, swine, sheep, goats horses, pets, birds and exotic animals. We market to 50 states as well as over 60 countries. We provide fast, friendly service, and cherish our customers. Books & Educational Items. Buckets, Tubs & Feeders. Clothing & Boots & Belts. Lawn Garden & BackYard. Pet Equipment & Treats. Rodent & Pest Control. The item “Hot-Shot DuraProd Rechargeable Shocker Prod Wand Set Cattle Swine 36 Inch Wand” is in sale since Wednesday, September 5, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “livestockconcepts” and is located in Hawarden, Iowa. This item can be shipped to United States.
  • Brand: Hot Shot
  • MPN: DXR36
Tags: , , , , , , , ,
Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 52 Inch Wand

Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine W/ 52 Inch Wand. Hot-Shot DuraProd Listing is for Motor and Battery Pack (includes 4 “C” Batteries) W/52 Inch Shaft Application The Hot-Shot® prod is an electric livestock prod designed to assist in the movement of cattle and hogs. Function The Hot-Shot® prod uses batteries to power an electronic circuit that generates a high voltage pulse. This pulse is delivered by lightly touching the animal with the two electrodes. Prod is not designed for hitting or striking an animal. Animal Protection Please follow the regulations that apply to animal protection and slaughtering in your area. WARNINGS -Hot-Shot® prod is DESIGNED FOR USE ON LIVESTOCK ONLY -KEEP THE UNIT AWAY FROM CHILDREN -NEVER USE IT ON HUMANS -KEEP PROD DRY: If unit gets wet IMMEDIATELY TAKE STEPS TO THOROUGHLY DRY UNIT OUT to avoid corrosion and/or unintended feedback -Clean, dry and store prod in dry environment. Remove batteries prior to cleaning or drying -The prod generates a high voltage pulse and you should never touch the electrodes while the unit is activated -Use in a well ventilated area. Do not use near flammable liquids or dust -Whenever the prod is not in use, place the safety clip under the trigger button (for the DuraProd move the trigger lock to the lock position) -Intended for ground level use only. Before purchasing any items/product, please insure your country allows this product to be imported. Canceling an Order If you need to cancel an order or make changes, the request must be made within one hour of placing the order and confirmed by an E-Commerce Customer Service Representative. The following rules apply: · Products must be in original packaging and in a new and resalable condition. · Any product that was used or fully/partially installed is non-returnable. Excellent customer service and competitive pricing, is what you will receive when purchasing from Livestock Concepts. We supply a complete line of animal health supplies to livestock producers, veterinarians, pet and equine owners, as well as hobby farmers. We offer over 14,000 items for cattle, swine, sheep, goats horses, pets, birds and exotic animals. We market to 50 states as well as over 60 countries. We provide fast, friendly service, and cherish our customers. Books & Educational Items. Buckets, Tubs & Feeders. Clothing & Boots & Belts. Lawn Garden & BackYard. Pet Equipment & Treats. Rodent & Pest Control. The item “Hot-Shot DuraProd Electric Shocker Prod Wand Set Cattle Swine With 52 Inch Wand” is in sale since Wednesday, July 18, 2018. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Beef Cattle”. The seller is “livestockconcepts” and is located in Hawarden, Iowa. This item can be shipped to United States.
  • Brand: Hot Shot
  • MPN: HUDX7613566
Tags: , , , , , , , ,